|
Full Product Line
|
|
Power Systems
The famous CERAMAG series of generators (A-60 and C3-750) continues to be the finest hazardous location generator available.
The Ceramag C3-750 series generators provides power to operate engine controls, control panels, communications, saftey systems and lighting.
 |
Downloadable PDF links:
Standard Features:
- Class 1 Division 2 (division 1 pending) temperature values
- 2 year warranty on generator, 1 year controller
- Sealed maintenance free design
- Adjustable regulated voltage and current setpoints
- Operates over wide and changing speed ranges
- All weather operation
- Corrosion resistant housing and winding
- Voltage regulation does not change with speed
- Scalable with multiple units
|
The Ceramag A-60 series alternator provides power to operate engine controls, control panels, communications, safety systems and lighting. The A-60 can be installed to drive from the engine or the cooler fan shaft using the appropriate COJO mounitng kit .
 |
Downloadable PDF links:
Standard Features:
- Class 1 Division 2
- 1year warranty
- Easy installation or field retrofit
- Operates over wide and changing speed ranges
- Corrosion resistant housing and winding
- Standard mounting pattern
- Brushless no wear long life design
- Heavy duty bearings in precision housing
|
Control and Distribution Panels
Designed to be used with the Ceramag products. The CBOX-LVC control and distribution panel comes equipped with the COJO Technology LVC-71 battery voltage monitoring system, fusing and terminals to facilitate easy connection of the alternator to batteries and the remainder of the electrical system.
 |
The LVC-71 Dc bus monitor and low voltage shutdown controller, is an intelligent battery voltage / bus monitor that senses and displays battery bus voltage between 9 -30 VDC. It contains 2 solid state relays rated at 15 Amps each, that are programmed to shut down at user selected low voltage levels. Also included is a low voltage by-pass timer that may be used to override the low voltage shut down condition for a user selectable period of time
|
Power Supplies, Battery Chargers, Battery boxes and Batteries
The BC series of switching power supply has been designed to operate 12 and 24 volt systems and systems where battery backup is required. The case design allows for base or side mounting.
 |
Downloadable PDF links:
Standard Features:
- Universal input 90 - 260 vac
- Power supply suitable for battery charging
- Plug and socket connectors on input and output
- Over current and short circuit protection
- Fault monitoring alarm output
- Common bus for battery and loads
- Adjustable output / charging voltage
|
 |
COJO can also supply insulated battery enclosures designed for all environmental conditions, while providing safe secure environments.
Standard Features:
- Non-insulated BBOX2
- High density insulation (25 cm foam core - foil backed) BBOX2-INS
- NEMA 4 certification
- Tabs for bolting to concrete or wall mounting
- Internal holding bar to keep batteries in place
|
|