.png?width=259&height=111&name=LOGO%20technologies%20v2%20(5).png "LOGO technologies v2 (5)")
- Products
- Macromatic
- Alternating Relays
Alternating relays are used in redundant load applications to equalize run times.
These relays can also be used to run multiple loads simultaneously when additional capacity is needed. Duplex Controllers are used for S.O.S.O. operation, with three switch input and alternation of which pump is turned on first.
Duplex Control, Plug-In
ARP Series Relays ensure that multiple loads get equal run time by alternating between two loads. In a typical application, an idle standby unit is available in case the first unit fails. Alternating relays prevent deterioration of the idle unit by equalizing run time.
S.O.S.O. Operation, Plug-In
ARP Series Relays ensure that multiple loads get equal run time by alternating between two loads. In a typical application, an idle standby unit is available in case the first unit fails. Alternating relays prevent deterioration of the idle unit by equalizing run time.
Triple Control, Plug-In
ATP Series Relays control up to three loads with three switch input: LEAD, LAG and LAG2. An optional top-mounted switch allows use as a Duplex relay until system expansion requires an additional third load.
Duplex Control, Flange
ARF Series Relays ensure that multiple loads get equal run time by alternating between two loads. The flange mounted enclosure is used for inner-door mounting. A back-mounted socket is included with the relay.
-1.png?width=450&height=150&name=finance%20(12%20%C3%97%204%20in)-1.png "finance (12 × 4 in)-1")
