ProTalk Plus

The ProTalk Plus is a device used to monitor for alarm conditions. Interfacing with your existing sensors, the ProTalk Plus watches for conditions that occur outside your predefined parameters. If an alarm occurs, such as power failure, building intrusion or equipment failure, the B1290 automatically dials out on the telephone line. When the phone is answered, the B1290 announces the name of the site and alarm condition that has occurred. If there is no answer or the alarm is not acknowledged, the B1290 will continue to dial through the programmed list of phone numbers until it reaches someone and is able to report the alarm.

The B1290 ProTalk Plus can be programmed to perform many more functions at the discretion of the user. It can:

• announce alarms over radio, telephone, public address system or any combination thereof.
• be programmed to send coded tones along with the voice messages to activate such devices as radio pagers, relays or annunciator panels.
• be used as a master station to concentrate alarms from a number of remote sites.
• be commanded to perform remote control functions by receiving codes from a touchtone telephone.
• use up to 4 directories and shifts to customize the callout based on alarm grouping or time of day.
• accept up to 7 expanders; increasing the capacity of the unit from the basic 8 alarm inputs and 4 relay outputs up to 64 alarms inputs and 32 relay outputs.
• log events into a report which can be read from the B1290 and saved to file.
• require an access code for dial-up access to programming.
• function in extreme temperatures of -40°C to +60°C (-40°F to 140°F).